Eco friendly Medical Suction Canister Comfortable For Hospital Surgical

Product Information

The negative pressure suction canisters are precision manufactured using high quality components. This suction canister is adaptable for floor, cabinet or wall-mounted units, and range in pressure from high to low vacuum system requirements ( -20mmhg to 200mmhg). Caps for all ports are engineered for a snuggle seal to prevent any vacuum loss. Patient port was designed with a 20 angle to allow quick hookup and prevent kinked tubing. Vacuum-tight precision engineered canister, with snap-on lid for spill prevention and suction optimization. Hydrophobic shut-off filter to prevent fluid overflow from passing into vacuum system. Includes 2 non sterile tubes: 3/16 x 6' tube, and a 3/16 x 18" tube. Purchase individually, or by case of 12.

INSTRUCTION FOR USE

SET UP

1. Place lid on canister, push down firmly making sure to engage the locking system.

NOTE: The lid is then not removable.

2. Cap the Ortho (Tandom) port (fig.C) & Accessory port (fig.D) for a good seal.

3. Attach vacuum tubing to vacuum port (fig.B) attach patient tubing to patient port (fig.A).

4. Check & test if you have a good seal for suctioning by turning on the Aspirator (Suction Machine) place

Company Information

Established in 1992, Suzhou Jinsheng Plastic Co., Ltd is a Chinese factory specialized in producing 

medical disposable plastic products, which have been exported to US, Europe, Australia and Japan etc. 

for years since 2002. 

Jinsheng covers a total area of 10,000m2, among which there're eight controlled workshops and one class

 100,000 (ISO Class 8) clean room of 1,300m2. Jinsheng employs 200-250 staff. With years of 

development, we're experienced in developing product design, making molds and producing medical 

plastic products. 

We’ve been certificated with ISO13485 and registered in FDA (registration number: 3005245797). 

Most importantly, Jinsheng has successfully passed FDA audit with no 483s or observations in April 2015. 

Jinsheng strictly follows ISO13485 and FDA laws and regulations for every production process.

If you're interested, please feel free to contact us. We are looking forward to becoming one of your most 

trustworthy cooperation partners. 

FDA (U.S. Food and Drug Administration) Registration:

FDA Registered Establishment Name: SUZHOU JINSHENG PLASTIC CO., LTD

FDA Registered Establishment Number: 3005245797